Evaporating liquid flow in a channel (An integral model based on shallow water flow approximation)

Liquefied Natural Gas (LNG) storage facilities generally include channels to convey potential spills of the liquid to an impoundment. There is increasing concern that dispersion of vapors generated by flow of LNG in a channel may lead to higher than limit vapor concentrations for safety at site boundary from channels that may be close to the dike walls. This issue is of recent concern to regulatory agencies, because the calculation of vapor hazard distance(s) from LNG flow in a channel is not required under existing LNG facility siting standards or regulations.An important parameter that directly affects the calculated LNG vapor dispersion distance is the source strength (i.e., the rate of vaporization of LNG flow from the wetted channel surfaces, as a function of spatial position and time). In this paper a model is presented which considers the variation of the depth of the flowing LNG with spatial location and time, and calculates the spatial and temporal dependence of the mass rate of vapor generation. Self similar profiles for the spatial variation of the thermal boundary layer in the liquid wetted wall and liquid depth variation are assumed. The variation with time of the location of the liquid spread front and the evaporation rate are calculated for the case of a constant LNG spill rate into a rectangular channel. The effects of two different channel slopes are evaluated. Details of the results and their impact on dispersion distances are discussed.     

Chemometrics in assessment of seasonal variation of water quality in fresh water systems

The spatial and temporal distribution of polycyclic aromatic hydrocarbons (PAHs) was investigated in Gomti River, a major tributary of the Ganga river (India). A total of 96 samples (water and sediments) were collected from eight different sites over a period of 2 years and analysed for 16 PAHs. The total concentrations of 16 PAHs in water and bed sediments ranged between 0.06 and 84.21 ??g/L (average (n?=?48), 10.33 ± 19.94 ??g/L) and 5.24?C3,722.87 ng/g dw [average (n?=?48): 697.25 ± 1,005.23 ng/g dw], respectively. In water, two- and three-ring PAHs and, in sediments, the three- and four-ring PAHs were the dominant species. The ratios of anthracene (An)/An + phenenthrene and fluoranthene (Fla)/Fla + pyrene were calculated to evaluate the possible sources of PAHs. These ratios reflected a pattern of pyrolytic input as a major source of PAHs in the river. Principal component analysis, further, separated the PAHs sources in the river sediments, suggesting that both the pyrolytic and petrogenic sources are contributing to the PAHs burden. The threat to biota of the river due to PAHs contamination was assessed using effect range low and effect range median values, and the results suggested that sediment at some occasions may pose biological impairment.     

Translating habitat class to land cover to map area of habitat of terrestrial vertebrates

Area of habitat (AOH) is defined as the “habitat available to a species, that is, habitat within its range” and is calculated by subtracting areas of unsuitable land cover and elevation from the range. The International Union for the Conservation of Nature (IUCN) Habitats Classification Scheme provides information on species habitat associations, and typically unvalidated expert opinion is used to match habitat to land-cover classes, which generates a source of uncertainty in AOH maps. We developed a data-driven method to translate IUCN habitat classes to land cover based on point locality data for 6986 species of terrestrial mammals, birds, amphibians, and reptiles. We extracted the land-cover class at each point locality and matched it to the IUCN habitat class or classes assigned to each species occurring there. Then, we modeled each land-cover class as a function of IUCN habitat with (SSG, using) logistic regression models. The resulting odds ratios were used to assess the strength of the association between each habitat and land-cover class. We then compared the performance of our data-driven model with those from a published translation table based on expert knowledge. We calculated the association between habitat classes and land-cover classes as a continuous variable, but to map AOH as binary presence or absence, it was necessary to apply a threshold of association. This threshold can be chosen by the user according to the required balance between omission and commission errors. Some habitats (e.g., forest and desert) were assigned to land-cover classes with more confidence than others (e.g., wetlands and artificial). The data-driven translation model and expert knowledge performed equally well, but the model provided greater standardization, objectivity, and repeatability. Furthermore, our approach allowed greater flexibility in the use of the results and uncertainty to be quantified. Our model can be modified for regional examinations and different taxonomic groups.     

Nanomaterials photocatalytic activities for waste water treatment: a review

Water is necessary for the survival of life on Earth. A wide range of pollutants has contaminated water resources in the last few decades. The presence of contaminants incredibly different dyes in waste, potable, and surface water is hazardous to environmental and human health. Different types of dyes are the principal contaminants in water that need sudden attention because of their widespread domestic and industrial use. The toxic effects of these dyes and their ability to resist traditional water treatment procedures have inspired the researcher to develop an eco-friendly method that could effectively and efficiently degrade these toxic contaminants. Here, in this review, we explored the effective and economical methods of metal-based nanomaterials photocatalytic degradation for successfully removing dyes from wastewater. This study provides a tool for protecting the environment and human health. In addition, the insights into the transformation of solar energy for photocatalytic reduction of toxic metal ions and photocatalytic degradation of dyes contaminated wastewater will open a gate for water treatment research. The mechanism of photocatalytic degradation and the parameters that affect the photocatalytic activities of various photocatalysts have also been reported.

     

Active biomonitoring with wet and dry moss: a case study in an urban area

Active biomonitoring of the air quality in Belgrade, Serbia, was performed using the moss Sphagnum girgensohnii. Moss bags were exposed in parallel with and without irrigation for 3 and 6 months, respectively, at three different sites. Twenty-nine elements were determined in the exposed moss samples by INAA. For all exposure periods, higher uptake in the irrigated moss bags was evident for Al, Cr, Fe, Zn and Sr. Elements such as Cl, K, Rb and Cs were depleted in the moss tissue during the time of exposure. For most of the elements the accumulation after 6 months exceeded that observed after 3 months.     

Removal of doxycycline hydrochloride from aqueous solution by rice husk ash using response surface methodology and disposability study

Environmental Science and Pollution Research - The huge demand and consumption of DOX, its incomplete metabolism, and complex behavior in atmosphere are causing a great ecological issue, which...     

Degradation of indulin, a kraft pine lignin, by Serratia marcescens

Serratia marcescens isolated from decaying coconut pith exhibited high lignolytic activity. Growth on indicator medium, analysis of residual indulin, and infra-red spectroscopic analysis indicated the lignolytic potential of the isolate. Ortho-Coumaric acid, ferulic acid, 2,3-dihydroxy cinnamic acid and protocatechuic acid were identified as intermediates involved in indulin degradation by S. marcescens. Qualitative confirmation and quantitative estimation of the intermediates were carried out by high performance thin layer chromatography (HPTLC).     

OPTIMIZATION OF MULTIPURPOSE RESERVOIR SYSTEM OPERATION1

ABSTRACT: The goal programming approach for multipurpose reservoir operation has been proposed and applied to the Bhadra reservoir system, having irrigation and hydropower production as dual purposes, in India. The objective of the model is to satisfy sequentially a series of operating criteria. Two goal programming models, one with the objective function as minimizing the deviations from storage targets and the other with the objective function as minimizing the deviations from release targets, have been formulated and applied to the reservoir system under study. The results proved that the model with release targets is preferred over the model with storage targets for determining operational policies for multipurpose reservoir system.     

Removal of lignin and tannin colour from aqueous solution by adsorption onto activated charcoal

Sorptive uptake of lignin and tannin from an aqueous phase by activated charcoal was investigated in the laboratory. The sorption reaction was found to be of a first order. The influence on the rate of sorption of various factors, such as amount of sorbent and pH of the system, have been investigated. Sorption data fit well into the Langmuir adsorption isotherm, indicating formation of a monolayer over a homogeneous sorbent surface. Sorption capacity, rate constant, intraparticle diffusion coefficient, etc. were calculated from the sorption data. Desorption studies indicate the irreversible nature of the sorption reaction, whereas interruption studies suggest film diffusion to be rate limiting.